| |
 |
 |
PM6500A, PM6200x, PM6202B, three of PenMount's newest
innovation, the ultimate combo board. A
collectively integrated features and
functions of auto detecting USB and RS232
serial interfaces supporting 4, 5 & 8 wire
resistive touch screens; complemented by the
superbly developed PenMount drivers with
auto installation driver capability.
PM6500A, PM6200x,PM6202B control board using PenMount
6000 controller that has been designed for
those who may like and all-in-one solution
with 10-bit A/D converter built-in to make
the total printed circuit board denser,
circuit diagram also designed for 12-bit ADC
for optional. There are two connectors on
this board, one connector is for 4, 5,
8-wire touch screen cable (optional), and
another is for 4-pin USB A type cable
(optional).
PM6202B Control Board
 PM6202B Data sheet
PM6202 board Driver Software
RS232 interface：DOS, Windows
2000/ XP/ XPE/ 2003/ 2008/ Vista/ 7, WinCE
4.2/ 5.0/ 6.0, Linux (Kernel 2.6 and
X-Window mode), QNX 6.2/ 6.3/ 6.4/ 6.5
USB interface：Windows 2000/ XP/ XPE/
2003/ 2008/ Vista/ 7, WinCE 4.2/ 5.0/ 6.0,
Linux OS (Kernel 2.6 and X-Window mode),
QNX 6.2/ 6.3/ 6.4/ 6.5 (Inbox support) |
 |
|
PM6500A Control Board
PM6500A Data sheet
 |
 |
|
Touch Screen |
For 4, 8-wire or 5-wire analog
resistive type |
|
Interface |
USB |
Full speed 12Mbps |
|
RS232 |
19200 baud rate, N81
PnP mode |
|
Touch Screen Controller |
PenMount 6000 controller IC |
|
Resolution |
2048x2048 |
|
Size |
60x26 mm, two 3φ screw holes |
|
Cursor accuracy |
< 1% (Active Area Diagonal of
touch screen with
PenMount Advanced calibration
utility support) |
|
Resistance Range |
50~1.3K ohm |
|
Diagnostic |
LED |
|
Operating Voltage |
+5V DC |
|
Electro Static Discharge (ESD)
|
Air Discharge 15KV ,
Contact Discharge 8KV |
|
Storage Temperature |
-40 ℃~ 85 ℃ |
|
Operating Temperature |
-20℃ ~ 70 ℃ |
|
Power Consumption |
Standby Mode : 14.4 mA ; Active
Mode : 22.5 mA
(VCC=+5V, Top sheet Panel
Resistance: 365 ohm ;
Bottom sheet Panel
Resistance: 660 ohm)
Note. Actual current will be
different by touch panel’s
resistance. |
|
PM6500 board Driver Software
RS232 interface：DOS, Windows
2000/ XP/ XPE/ 2003/ 2008/ Vista/ 7,
WinCE 4.2/ 5.0/ 6.0, Linux (Kernel 2.6
and X-Window mode), QNX 6.2/ 6.3.2/
6.4.1/ 6.5USB interface：Windows
2000/ XP/ XPE/ 2003/ 2008/ Vista/ 7,
WinCE 4.2/ 5.0/ 6.0,
Linux OS (Kernel 2.6 and X-Window mode),
QNX 6.4.1/ 6.5 (Inbox support) |
|
|
PM6200A Control
Board
PM6200A Data sheet
 |
|
|
PM6200C Control
Board
PM6200C Data sheet
|
Touch Screen |
For 4-, 5-, 8-wire analog
resistive type |
|
Interface |
USB |
Full speed 12MHz bps |
|
RS232 |
19200 / 9600 baud rate
non-PnP / PnP mode |
|
Touch Screen Controller |
PenMount 6000 controller IC |
|
Resolution |
2048x2048 |
|
Size |
62.0 x 33.0 mm, two 3.5 φ screw
holes |
|
Cursor accuracy |
< 1% (Active Area Diagonal of
touch screen with
PenMount Advanced calibration
utility support) |
|
Resistance Range |
50~1.3K ohm |
|
Diagnostic |
LED |
|
Operating Voltage |
+5V DC for USB
+5V~12V DC for RS232 (+5~12V for
4/8-wire; +5V only for 5-wire) |
|
Electro Static Discharge (ESD)
|
Air Discharge 15KV ,
Contact Discharge 8KV |
|
Storage Temperature |
-40 ℃~ 85 ℃ |
|
Operating Temperature |
-20℃ ~ 70 ℃ |
|
Power Consumption |
Standby Mode : 15.4 mA ; Active
Mode : 24.2 mA
(VCC=+5V, Top sheet Panel
Resistance: 365 ohm ;
Bottom sheet Panel Resistance:
660 ohm)
Note. Actual current will be
different by touch panel’s
resistance. |
|
|
PM6200 board Driver Software
RS232 interface：DOS, Windows
2000/ XP/ XPE/ 2003/ 2008/ Vista/ 7, WinCE
4.2/ 5.0/ 6.0, Linux (Kernel 2.6 and
X-Window mode), QNX 6.2/ 6.3/ 6.4/ 6.5
USB interface：Windows 2000/ XP/
XPE/ 2003/ 2008/ Vista/ 7, WinCE 4.2/ 5.0/
6.0,
Linux OS (Kernel 2.6 and X-Window mode),
QNX 6.2/ 6.3/ 6.4/ 6.5 (Inbox support) |
|
|
|
|
|
