PenMount USB interface control board has 1 type of board.

- PM6300 : supports 4, 8-wire or 5-wire touch screen
All the control board is bundled with drivers.

PM6300A Data sheet

Touch Screen For 4, 8-wire or 5-wire analog resistive type Communications USB Full-speed, 12Mbps Touch Screen Controller PenMount 6000 controller IC Resolution 2048x2048 Size 60x26 mm, two 3φ screw holes Cursor accuracy < 1%  (Active Area Diagonal of touch screen with PenMount Advanced calibration utility support)   Resistance Range 50~1.3K ohm Diagnostic LED on board Operating Voltage +5V DC Electro Static Discharge (ESD)  Air Discharge 15KV , Contact Discharge 8KV Storage Temperature -40 ℃~ 85 ℃ Operating Temperature -20℃ ~ 70 ℃ Power Consumption Standby Mode : 13.4 mA ; Active Mode : 21.5 mA (VCC=+5V, Top sheet Panel Resistance: 365 ohm ;          Bottom sheet Panel Resistance: 660 ohm) Note. Actual current will be different by touch panel’s resistance.

PM6300A board Driver Software   Windows 2000 / XP / XPE / 2003 / 2008/ Vista / 7 WinCE 4.2 / 5.0 / 6.0 Linux ( Kernel 2.6 and X-Window mode ) QNX 6.4.1/ 6.5 ( Inbox support )