|
PenMount touch control board communicated
to system via RS-232 interface is available
for 2 kinds of control boards:
- PM9026BH : supports 4-wire and 8-wire
touch screen
- PM9036BH : supports 4-wire, 5-wire and
8-wire touch screen
PM9026BH Control Board
 PM9026BH Data sheet
 |
|
|
Touch Screen |
For 4- & 8- wire analog
resistive type |
|
Communications |
RS-232 interface |
|
Baud Rate |
19200 baud rate fixed, N81, PnP
mode |
|
Touch Screen Controller |
PenMount 9000 microcontroller |
|
Resistance Range |
50~1.3K Ω |
|
Resolution |
2048x2048 |
|
Diagnostic |
LED on board |
|
Electrostatic Discharge (ESD) |
Air Discharge 15KV
Contact Discharge 8KV |
|
Operating Voltage |
5V to 12V DC |
|
Operating Temperature |
0℃ ~ 50 ℃ |
|
Size |
60 (L) x 20 (W) x 8.3 (H) mm |
|
Power Consumption |
Standby Mode : 15 mA ; Active
Mode : 26.5 mA
( VCC=+5V, Top sheet Panel
Resistance: 365 ohm ; Bottom
sheet Panel Resistance: 660 ohm
)
Note. Actual current will be
different by touch panel’s
resistance. |
|
PM9026BH control board is designed to have a very small mechanical size in order to be located inside the system easily. PM9026BH board is supporting 4- and 8-wire touch screen.
|
PM9026BH Control Board Driver Software
DOS, Windows 3.1/ NT4.0/ 95/ 98/ Me/
2000/ XP/ 2003/ 2008/ Vista/ 7,
Linux (up to kernel 2.6), QNX 6.2/6.3,
Windows CE 4.2/ 5.0/ 6.0 (for X86,
Armv4, Armv4i platform);
Solaris 10 |
 |
PM9036CH
Control Board
PM9036CH Data sheet
PM9036CH Control Board Driver Software
DOS, Windows 3.1/ NT4.0/ 95/ 98/ Me/
2000/ XP/ 2003/ 2008/ Vista/ 7,
Linux (up to kernel 2.6), QNX 6.2/
6.3.2/ 6.4.1/ 6.5,
Windows CE 4.2/ 5.0/ 6.0 (for X86,
Armv4, Armv4i platform);
Solaris 10
|
|
|
