|
PenMount touch controller series of 6000,
9000 and 5000 support 4, 5 and 8 wire touch
screens. As the controller sensing theory
for 4, 5 and 8 wire touch screens is
different from each other, the PenMount
control board is thus designed with a switch
on board for selection of 4, or 5 or 8 wire
type of touch screen it is to be bundled
with. |
|
Even though there is already a proliferation
of the Plug-N-Play USB in the market, there
are still some industrial computers without
the PNP design. And as such, PenMount RS-232
touch controller series provide supports for
both the PNP and Non-PNP modes, and for
9600bps and 19200bps baud rates, with a
selectable switch.
Below are PenMount touch controllers with
built-in switches for 4- , 5- or 8-wire
touch screens selection;
(1) PM6300, 4-/5-/8-wire USB control board
(2) PM6200C & PM6500, 4-/5-/8-wire RS-232
and USB combo card
(3) PM9036BH, 4-/5-/8-wire RS-232 control
board
PenMount PM6500, PM6200C and PM9036BH are
also with on-board switch for PNP/Non-PNP
selection and 19200/9600bps baud rate
selection.
In some applications, user can set the
RS-232 port to Non-PNP mode. To set to
Non-PNP mode, only the RX and TX signal pins
need be connected to the PenMount RS-232
control board; the operating system should
be Microsoft Windows 2000 or later; select
the Non-PNP mode from the built-in switch on
the PenMount control board. For an optimized
Non-PNP settings, bundle it with the
PenMount Non-PNP driver. Only PM9036BH
RS-232 board has Non-PNP driver support, if
you have applications using Non-PNP mode,
please choose PM9036BH. The Non-PNP driver
for PM6500 and PM6200C will be ready in Q3
of this year; user can download them
directly from our website.
If the distance between the touch screen
with PenMount board and the system is longer
than 5 meters, and with the possibility of
the connecting cable running through high
frequency or high voltage area, user can set
baud rate to 9600bps for a better and more
stable signal. |
 |
|
We have 16 years of experience developing
PenMount touch controller, and its software
and hardware meet and fulfill customer’s
need. If you have any specific requirements,
please let us know, we are willing to help
you. For more PenMount controllers and
drivers information, please visit our
websites:
http://www.salt.com.tw and
http://www.penmount.com.
Please feel free to contact us at our email
address
salt@salt.com.tw
or service@penmount.com . |
