Touch Screen

For 4-, 5-, 8-wire analog resistive type

Interface       

USB

Full speed 12MHz bps

RS232

19200 / 9600 baud rate

non-PnP / PnP mode

Touch Screen Controller

PenMount 6000 controller IC

Resolution

2048X2048

Size

62.0 x 33.0 mm, two 3.5 φ screw holes

Cursor accuracy

< 1%  (Active Area Diagonal of touch screen with

PenMount Advanced calibration utility support)

Diagnostic

LED on board

Resistance range

50 ~ 1.3K ohm

Operating Voltage

+5V DC for USB

+5V~12V DC for RS232 (+5~12V for 4/8-wire; +5V only for 5-wire)

Electro Static Discharge (ESD)

Air Discharge 15KV

Contact Discharge 8KV

Storage Temperature

-40 ℃ ~ 85 ℃

Operating Temperature

-20 ℃ ~ 70 ℃

Power Consumption

Standby Mode : 15.4 mA ; Active Mode : 24.2 mA

(VCC=+5V, Top sheet Panel Resistance: 365 ohm ;
 Bottom sheet Panel Resistance: 660 ohm)

Note. Actual current will be different by touch panel’s resistance.